Name: Free Shape Stickers (Kiss Cut)
Brand: Betterway Systems Co., Ltd

Product Features

Info / 2 Sizes
54×86 : Regular (ID-1) / 74×105 : Intl (ID-2)
Glossy or Matte coating can be selected. Serial numbering can also be added.
※Forgery of official documents or cards will not be allowed.
Built-In Editor / PDF
Built-In Editor: Choose from a free range of template designs and edit to your liking.
PDF Upload: Download Template and fill in the image background up to the bleed size (full bleed)
Packaging
Bundle: Cards stacked and wrapped altogether.
Individual: Cards will be packaged individually.
Add a lanyard & PVC card case along with the ID card.

2mm Bleed Margin
As there is usually a shift in printing/cutting during production, kindly make sure to fill your uploaded image to the edge of the bleed size.
*Bleed Size = Trim Size + 2mm Margin Bleed

Design With Borders OR Lines
[Lines]
Take note that there may be slight shift of 0.5-1mm during production, whereby any straight lines near the edges of the design may appear slightly slanted.

[Borders]
Due to the slight shift of 0.5-1mm during production,
printed borders may appear slightly uneven and will not be perfectly centralized.

Safety Area

Trim Size

Bleed Size

Unit : mm

Accessories

Clip Lanyards
PVC Card Holders (Hard)

*Double-Clip lanyard is recommend for use on PVC Card Holders (Hard).

Finishing

Numbering

Precautions

01. Size & Margin

- *Small Stickers (5mm & above)
- - Cutlines within a small 10×10 stickers, may not be cut properly, as it is too small.
- *Thin / Narrow Shapes
- - Gaps between thin/narrow lines must be at least 2mm and above.
- *2mm Gap Spacing
- - Cutlines and artworks has to be 2mm apart.

- *When Deluxe Matte Adhesive is selected
- a) Due to the thickness of the sticker material, the minimum size has to be at least 20x20mm.
- *When Deluxe Matte Adhesive is selected
- b) Avoid sharp or jagged edges.

- *Peeling Off Background
- - Please gently hold onto to the individual stickers when peeling off the sticker background. This will prevent any tearing or damages.

- *Multiple Sticker Sheets
- - Multiple sticker sheets in one big sheet cannot be produced. Please order per sheet design.

02. Create PDF: Cutting Lines

- *Adobe Illustrator - Add a layer for the cutting line and Save As PDF.
- e.g) When Creating a 150x100mm Sticker Sheet
- *Working Size = 154x104mm
- Please leave a 5mm gap margin between the cutting line and working size. 144X94mm would be recommended.
- 1 Create Cutting layer
- 2 Draw a vector line using Tools > Pen (See Stroke)
- 3 Adobe PDF Preset : Press Quality > Acrobat 6 (PDF 1.5) > Create Acrobat Layers from Top-Level Layers
- *Creating Cutting Line
- If there are too many path line counts, go to Object > Path > Simplify to reduce the counts.
- *If there is too many path counts in the cutline, it may result in the below image (right).

03. Path Line Counts - Additional Charges

*Additional Charges may apply - Path line counts
1 Additional cost will be incurred for cutting line length (total) of 3.5mm (3500mm) based on an A5 sheet.
2 Check Length of Path [Illustrator]: Window > Document Info > Tribar on right > Objects

04. Cut Line Corners

*These stickers are cut individually, piece by piece.
Unlike Thomson die-cutting method, we cut each stickers piece by piece for each sheet.
Due to this, there is a slight cuttting shift of 0.5-1mm during production, especially around corners or edges (arrow in red).
*Reference : Thomson Die-cutting (mainly used in bulk printing)

05. Avoid Lettering Stickers

- *Minimum Sticker Size
- - 5×5 (mm) & above
- - Deluxe Matte Adhesive material: min. 20x20mm and above
- *5x5mm and below cutline cannot be produced.
- We recommend to avoid sharp edges or complicated jagged cutlines.
- (do note that Deluxe Matte Adhesive requires at least 20x20mm)

06. Between Stickers : 3mm margin gap

- *Sticker Gap Margin: 3mm and above
- With a 3mm gap margin, there will be no issues peeling off each individual sticker on the sheet.

07. 3mm Margin: Between Stickers & Sheet Cut Line

- *Please place all the stickers within 3mm margin inwards from the sheet cut size.
- E.g.)
- Cutting Size : 150×100(mm)
- Stickers Safety Area : 144×94(mm) - (circled in Red)
- *3mm margin gap is required between the stickers and the sheet size.
- E.g.) For a 150x100mm Sticker Sheet:
- *Working Size = File Submission in 154x104mm
- Create the stickers in sheet, 5mm inwards (144X94mm) from the total artboard size (working size).

Paper Info

Yupo Matte (Clear Vinyl Backing)

Weight 080g

Tearproof and waterproof synthetic sticker paper.Matte surface. Sticker paper backing is of clear vinyl material.

Deluxe Matte Adhesive (Removeable)

Weight 135g

Thick and durable. Suitable only for smooth and flat surfaces. Not for curved surfaces. No residue when removed.

Kraft Paper Adhesive

Weight 057g

Naturally textured adhesive kraft paper. Mainly used in sticker printing.

Matte Silver Adhesive

Weight 050g

Matte silver adhesive sheet widely used for sticker printing.

Standard Gloss Adhesive

Weight 080g

Adhesive bright white, water-resistant, tear-resistant paper with a high gloss smooth finish. Widely used for sticker/label printing.

Standard Semi-gloss Adhesive

Weight 090g

Adhesive, muted white paper with a semi-gloss finish. Widely used for sticker/label printing.

Transparent Sheet Adhesive (Permanent)

Weight 050g

Highly adhesive transparent, waterproof, tear-resistant vinyl. Non-Removeable (if removed, sticky residue marks will be visible).

Glossy Gold Adhesive

Weight 050g

Glossy gold metallic effect adhesive sheet widely used for sticker printing.

Glossy Silver Adhesive

Weight 050g

Glossy silver metallic effect adhesive sheet. Widely used for premium sticker printing.

Returns & Exchange

Here at Red Printing, we make every effort to ensure excellent customer satisfaction. We pride ourselves on our high-quality print production, but sometimes - as with all printing, a manufacturing issue can arise.

Please note that we are not responsible for individual circumstances which are beyond our control, but not limited to, the following:

Consumer-made mistakes such as:

Font mis-selection, typo, grammar and spelling errors
Poor/low quality and low-resolution uploaded images
Design errors and wrong colour selections
Any errors made by you during the creation of an artwork file, mis-selection of size, quantity, product type, finishing options, paper type, cutting options and other order specifications
Wrong template selection, incorrect image orientation and positioning
Duplicate orders
Incorrect file layout for finishing such as folding, creasing, die or kiss cutting
Delivery delays due to erroneous files and damage to products after delivery to the customer

Please note that we do not proof artwork or designs created by customers before production, and it's the customer's responsibility to check the print file thoroughly before sending to print. Please preview your designs, check and correct any mistakes before placing your order and payment. Red Printing reserve the right to decide whether to issue a refund, replacement or partial refund on a case-by-case basis.

If a refund request is made and approved, through credit card, it would reflect in your next bank statement (depending on banks) or if through PayPal, you should receive the funds back to you within approx. 5-7 business days.

Just to further inform you on colour printing, even though we ask that you edit your files in CMYK, colours are still displayed on the screen using RGB and will always look brighter and more vibrant than the final output. Because of this, the colours on the printed products may differ slightly than seen on your monitor screen. Please refer to our User Guide for more information.

For further inquiries or to make a reprint/refund request, please email us at support@redprinting.sg and we will look into it.

Order Total	Digital Print (Labels & Stickers, Business Cards, Marketing Materials, Cards & Gifts, and Photo Prints)	Banners and Signs
SGD 0.00 - SGD 49.99	Shipping: SGD 5.90	Shipping: SGD 5.90
Over SGD 50.00	Free Shipping	Free Shipping
Delivery Time: 7-9 business days

Free Shape Stickers (kiss Cut)

Printing Quotation

Before We Print

Product Features

Sizes

Accessories

Finishing

Design Guideline

Precautions

Paper Info

Finishing Info

Bundle Cutting

Individual Cutting

Glossy Coating

Matte Coating

White Printing

Returns & Exchange